? 1996 ixys all rights reserved symbol test conditions maximum ratings v ces t j = 25 c to 150 c 1000 v v cgr t j = 25 c to 150 c; r ge = 1 m w 1000 v v ges continuous 20 v v gem transient 30 v i c25 t c = 25 c34a i c90 t c = 90 c17a i cm t c = 25 c, 1 ms 68 a ssoa v ge = 15 v, t vj = 125 c, r g = 82 w i cm = 34 a (rbsoa) clamped inductive load, l = 300 m h @ 0.8 v ces p c t c = 25 c 150 w t j -55 ... +150 c t jm 150 c t stg -55 ... +150 c m d mounting torque (m3) 1.13/10 nm/lb.in. weight to-204 = 18 g, to-247 = 6 g maximum lead temperature for soldering 300 c 1.6 mm (0.062 in.) from case for 10 s symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. bv ces i c = 3 ma, v ge = 0 v 1000 v v ge(th) i c = 250 m a, v ce = v ge 2.5 5 v i ces v ce = 0.8 ? v ces t j = 25 c 250 m a v ge = 0 v t j = 125 c1ma i ges v ce = 0 v, v ge = 20 v 100 na v ce(sat) i c = i c90 , v ge = 15 v 17n100 3.5 v 17n100a 4.0 v to-247 ad (ixgh) v ces i c25 v ce(sat) low v ce(sat) igbt ixgh/ixgm 17 n100 1000 v 34 a 3.5 v high speed igbt ixgh/ixgm 17 n100a 1000 v 34 a 4.0 v g c e to-204 ae (ixgm) c g = gate, c = collector, e = emitter, tab = collector features l international standard packages l 2nd generation hdmos tm process l low v ce(sat) - for low on-state conduction losses l high current handling capability l mos gate turn-on - drive simplicity l voltage rating guaranteed at high temperature (125 c) applications l ac motor speed control l dc servo and robot drives l dc choppers l uninterruptible power supplies (ups) l switch-mode and resonant-mode power supplies advantages l easy to mount with 1 screw (to-247) (isolated mounting screw hole) l high power density 91515e (3/96)
ixys mosfets and igbts are covered by one or more of the following u.s. patents: 4,835,592 4,881,106 5,017,508 5,049,961 5,187,117 5,486,715 4,850,072 4,931,844 5,034,796 5,063,307 5,237,481 5,381,025 ixys reserves the right to change limits, test conditions, and dimensions. ixgh 17n100 ixgm 17n100 ixgh 17n100a ixgm 17n100a symbol test conditions characteristic values (t j = 25 c, unless otherwise specified) min. typ. max. g fs i c = i c90 ; v ce = 10 v, 6 15 s pulse test, t 300 m s, duty cycle 2 % c ies 1500 pf c oes v ce = 25 v, v ge = 0 v, f = 1 mhz 175 pf c res 40 pf q g 100 120 nc q ge i c = i c90 , v ge = 15 v, v ce = 0.5 v ces 20 30 nc q gc 60 90 nc t d(on) 100 ns t ri 200 ns t d(off) 500 1000 ns t fi 17n100 750 ns 17n100a 450 750 ns e off 17n100a 3 mj t d(on) 100 ns t ri 200 ns e on 2.5 mj t d(off) 700 1000 ns t fi 17n100 1200 2000 ns 17n100a 750 1000 ns e off 17n100 8 mj 17n100a 6 mj r thjc 0.83 k/w r thck 0.25 k/w ixgh 17n100 and ixgh 17n100 a characteristic curves are located on the ixgh 17n100u1 and ixgh 17n100au1 data sheets. to-247 ad outline inductive load, t j = 25 c i c = i c90 , v ge = 15 v, l = 300 m h, v ce = 0.8 v ces , r g = r off = 82 w remarks: switching times may increase for v ce (clamp) > 0.8 ? v ces , higher t j or increased r g to-204ae outline 1 = gate 2 = collector 3 = emitter tab = collector 1 = gate 2 = emitter case = collector inductive load, t j = 125 c i c = i c90 , v ge = 15 v, l = 300 m h v ce = 0.8 v ces , r g = r off = 82 w remarks: switching times may increase for v ce (clamp) > 0.8 ? v ces , higher t j or increased r g
|
